Long reach excavator finance

Long reach machines are bought for a purpose, not for general hire, and funders assess them accordingly, the contract matters as much as the machine.

Not picked a machine yet? See used excavators from UK dealers, priced per month, on Plant Monthly.

  • FCA regulatedAppointed Representative, FRN 1031964
  • 60+ lendersA panel of lenders, not one bank
  • 5.0 from 20 Google reviews
  • No credit checkEnquiring leaves no mark on your file

Yes, though it needs placing with the right funder rather than the first one. A long reach excavator is still a hard asset, but the buyer pool is narrow: dredging, flood defence, lagoon and demolition specialists, not general groundworks. That narrow resale market makes some funders cautious, and a purpose-built long reach presents better than a machine converted with a third-party front end. The value sits in the base machine. If the long reach front is aftermarket, be ready to evidence who built it and whether the standard boom is included, because a machine that can be returned to standard configuration is far easier to fund.

Who finances this

Flood defence and watercourse contractors, drainage board framework suppliers, lagoon and slurry specialists, and demolition firms doing high reach enabling works. The trigger is almost always a specific award, an Environment Agency or internal drainage board framework, a reservoir desilting programme, or a demolition package where the structure cannot be approached at close quarters. Very few buy one speculatively, and funders know that.

How lenders see it

This is specialist plant and it belongs with funders who write specialist tickets, typically independents with a plant desk rather than a general bank lessor. Security is real but slow: a long reach can take months to sell rather than weeks, so expect a more conservative structure, a contribution on an older machine, and closer questioning about the work behind it. Factory-built long reach machines from CAT, Hitachi, Komatsu, Volvo and Doosan present best. Aftermarket conversions can still be funded but the funder will want to know whose boom it is and whether the original front end comes with the deal. What gets these declined is a general contractor with no track record in the application buying on speculation. What gets them approved is a named framework, a sensible machine and a business that has done the work before.

Buying used

Yes, but selectively, factory-built used machines up to around eight years fund well, while older aftermarket conversions need a stronger covenant behind them.

Also in plant and construction equipment finance

See everything we fund in plant and construction equipment finance →

Stage payments and retention

Flowzo funds the gap created by stage payments, long terms and retention, the cash flow problem the plant itself does not solve.

Buying plant at auction? We can give you an indicative decision before you bid, and we list every UK machinery auctioneer and livestock mart.

Machines we have funded

Hitachi ZX210LC-6 Long Reach21 tonne long reach excavator
Hitachi ZX350LC-6 Long Reach35 tonne long reach machine
CAT 320 Long Reach20 tonne long reach excavator
CAT 330 Long Reach30 tonne long reach excavator
Komatsu PC210LC-11 Long Reach21 tonne long reach for dredging
Volvo EC220EL Long Reach22 tonne long reach excavator
Develon DX225LC-7 Long Reach22 tonne long reach for waterways
JCB JS220LC Long Reach22 tonne long reach for slope work
Liebherr R 926 Long Reach26 tonne long reach excavator
Hyundai HX220AL Long Reach22 tonne dredging and dyke machine

What a long reach excavator actually costs to buy

Prices for a long reach excavator advertised by UK suppliers run from £41,500 to £195,000 (checked 28 October 2026).

Year and hours do not set the price band, donor-chassis tonnage does: the Kobelco SK130LC-11 (13-tonne class, 2022, 4,204 hours) and the CAT 320 GC 15m Long Reach (20-tonne class, 2022, 3,211 hours) are near-identical in age and hours yet sit £32,000 apart (£64,500 vs £96,500 ex VAT), and the same pattern repeats up the scale with the CAT 336 FL 25m Telescopic Shaft Sinker (a 30-tonne-class donor with a 25m boom) at £195,000 ex VAT, roughly double the 15-18m/20-24 tonne cluster. Buyers comparing long reach prices by hours or year alone will misread the market; the base machine's tonnage class plus boom reach, not usage, is what moves the price.

Asking prices for a long reach excavator, advertised by UK suppliers and checked 28 October 2026
MachineAsking priceSeen at
Hitachi ZX85US-5A Long Reach, 2015, 2,036 hours, 8,290kg£41,500 VAT not statedsjhallplant.com
Kobelco SK130LC-11 long reach, 2022, 4,204 hours£64,500 VAT not statedmascus.co.uk
Hitachi ZX130 LCN-7 Long Reach, 2022, 4,400 hours, 15,000kg£72,500 VAT not statedsjhallplant.com
Komatsu PC210LC-11 SLF 15m Long Reach, 2020, 5,613 hours£84,950 VAT not statedmascus.co.uk
Kobelco SK210LC-11 Long Reach, 4,400 hours, 24,500kg£86,500 VAT not statedsjhallplant.com
CAT 320 GC 15m Long Reach, 2022, 3,211 hours, 24,000kg gross weight, 90kW, 1 owner from new£96,500 VAT not statedmascus.co.uk
Komatsu PC210LC long reach, 2019, 3,700 hours£97,500 VAT not statedmascus.co.uk
Case CX210D LR Long Reach, 2021, 3,500 hours£99,500 VAT not statedmascus.co.uk
CAT 336 F L 25m Telescopic Shaft Sinker, 2018, 4,126 hours£195,000 VAT not statedmascus.co.uk

Prices checked 28 October 2026 on mascus.co.uk, sjhallplant.com. These are asking prices observed on dealer and marketplace listings, shown as examples. They are not a quote or an offer of finance, and they move with the market. Check the current advert before budgeting.

How finance works on a long reach excavator

The prices above are what a seller is asking. What a funder will actually do with the purchase is a separate question, and it is the one that decides whether the deal happens.

Finance terms CW Asset Finance typically arranges, as at 31 October 2026
QuestionTypical answer
Term available12 to 72 months. Most agreements sit between 24 and 60 months; anything shorter or longer needs a funder check before you rely on it.
Age of the assetThere is no single cut-off. It depends on the asset class, and condition, hours and resale value are underwritten rather than the year alone. Tell us the age and we will say before you commit.
Buying from a private sellerOften possible, but case by case. It needs a funder who will write it, an inspection and proof of ownership, so say whether the seller is a dealer or a private seller when you enquire.
DepositFrequently nil where the credit profile is standard. Where it is not, typically 10–20%, nearer 20% if a default is recent.
VAT on the purchaseBoth approaches exist, depending on the funder. The agreement is commonly written on the ex-VAT price with the VAT paid upfront and reclaimed, though some funders will include the VAT in the agreement.

General guidance from our own funder panel as at 31 October 2026, not a quote and not an offer of finance. All finance is subject to status and to the funder's own criteria.

Common questions

The details people ask about before they apply.

Browse all questions
Can I finance a long reach conversion on a machine I own?

Sometimes, though it is not straightforward. Funding a front end alone means taking security over a component fitted to an asset the funder does not own. It is more commonly done as a refinance of the whole machine once the conversion is complete, which gives the funder security over a single complete unit.

Do I need a contract in place to get approved?

Not formally, but it makes an enormous difference. A named framework or award shows the funder where the repayments come from and why a specialist machine is justified. Without one, expect closer scrutiny of the balance sheet and a larger contribution. Send the award letter with the application.

Is a long reach harder to fund than a standard 21 tonne?

Yes, modestly. The asset is more specialised and the resale pool much smaller, so funders assume a longer disposal period. The structure tends to be tighter rather than the answer being no. A factory-built machine from a major marque will always present more easily than an aftermarket conversion.

Can I fund the standard boom as well as the long reach front?

Usually yes, provided both appear on the supplier invoice. It is worth doing. A machine that can be converted back to standard configuration appeals to a far wider set of buyers, which supports the residual value and makes the funder more comfortable from the outset.

Will the funder want to inspect the machine?

On specialist and used plant, often yes. An independent inspection confirms condition, hours and that the machine matches the invoice description. It is routine rather than a warning sign, and on a long reach it usually also confirms the pin sizes and the origin of the front end. We will arrange it as part of the process.

Tell us what you need

About a minute of plain questions, and no documents to dig out.

Min £10,000Max £10m
1 year6 years

Prime is established and profitable with clean credit. Specialist covers newer businesses and credit that needs explaining, the asset carries part of the risk, so finance is often available where an unsecured loan is not.

£, a month, roughly

Total repayable about £,

Illustrative only, not a quote. Flat rates are indicative, subject to status and are not an APR. Figures are for limited companies on unregulated agreements and exclude VAT and fees. Sole traders and partnerships borrowing £25,000 or less may be regulated and are quoted differently.

Start my enquiry

No credit check, and enquiring leaves no mark on your credit file. Finance is subject to status. We are a credit broker, not a lender.

Only pricing it up?

An enquiry is a conversation, not an application. Nothing runs against your file until you tell us to go ahead.

No credit check to enquire

Your credit scoreUntouched

Conor reads every enquiry himself. We will call you within 24 business hours, and it will be the person who actually arranges the finance, not a call centre, and not a form that disappears.

A real person on your side

One adviser from your first enquiry to the money in your account. No call centres.

Your adviser

Conor Hull
Mon to Fri, 9am–6pm
5.0 from 20 Google reviews

Thinking about long reach excavator finance?

A few questions, and we will tell you what the panel can do. No obligation, and no call centres.