Wheel balancer finance
Diagnostic and standard wheel balancers funded for tyre bays, fast-fit sites and garages chasing vibration complaints out of the workshop.
Whole-of-market — 60+ lenders searched, including
Can you finance a wheel balancer?
Yes, usually as part of a package rather than on its own. A wheel balancer is a hard asset with a clear serial number and an active dealer market, and funders are comfortable with it. The practical issue is value: a standard balancer often falls below the minimum a funder will write as a standalone agreement, so it is typically funded with a tyre changer and the rest of the bay. High-end diagnostic balancers carry enough value to stand alone. Used machines are fundable.
Used kit: Yes — used balancers fund comfortably as part of a package, with machines eight to ten years old accepted where calibration is current.
Get a quoteor call 0333 772 4864
What would a wheel balancer cost per month?
Asset finance is quoted on a flat rate, so that is what the buttons show, with the equivalent APR beside it. Your exact rate depends on the asset, the term, the deposit and the lender.
Prime is an established, profitable business with clean credit. Specialist covers newer businesses and credit that needs explaining — the asset itself carries part of the risk, which is why finance is often available where an unsecured loan is not.
Representative example: on Hire Purchase, borrowing £25,000 over 48 months at a 5.15% flat rate (equivalent to 9.9% APR representative), you would repay around £628 a month; total amount repayable approximately £30,150, of which £5,150 is the cost of finance. This calculator is for illustration only — it is not a quote or an offer of finance, and the rate and repayments you are offered will depend on the asset, term, deposit and your circumstances. CW Asset Finance is a credit broker, not a lender, and may receive a commission from the lender that funds your agreement. All finance is subject to status, affordability and lender approval.
Rates shown are indicative flat rates with the equivalent APR alongside — the two are not the same number. Indicative only and does not constitute a quote or an offer of finance. Subject to status and lender approval.
How lenders treat it
Balancers are simple, honest security: free-standing, plugged in, serialised, and moved on readily through garage equipment dealers. Nothing about them becomes a fixture, so tenancy is a non-issue and no landlord waiver arises, which is a welcome change from lifts. Cones, adaptors, clamping kits and weights are tooling and consumables, outside the agreement. Software updates for diagnostic balancers are a soft cost and any subscription element cannot be funded. The only real barrier is deal size, which is why balancers are almost always written with a changer or a wider fit-out. Declines relate to the buyer and their trading history rather than to the asset itself.
Makes and models we fund
Examples of the machines we are asked to fund. This is not an exhaustive list — if what you are buying is not here, it does not mean we cannot fund it. Your supplier quote is what the agreement is written against.
| Machine | What it is |
|---|---|
| Hunter Road Force Elite | Balancer that measures tyre and wheel runout |
| Hunter SmartWeight Pro | Diagnostic balancer for fast wheel service |
| John Bean B2000 | Video balancer for car and van wheels |
| John Bean wheel balancers | Balancers for tyre bays and garages |
| Hofmann geodyna 7600 | Balancer with laser weight placement |
| Hofmann geodyna 980L | Balancer for heavier wheels and light commercials |
| Corghi EM 9880 | Touchless balancer for rapid tyre fitting |
| Corghi EM 43 | Entry balancer for smaller workshops |
| Bosch WBE 4430 | Balancer with automatic data entry |
| Bosch WBE 4200 | Compact balancer for general repair bays |
Get a quoteor call 0333 772 4864
Who buys one
Typically a garage or tyre bay whose balancer is struggling with larger diameter alloys and low profile tyres, with vibration comebacks eating technician time. Also new fast-fit sites fitting out a bay from scratch, and independents adding road force measurement so they can diagnose tyre and wheel problems rather than keep rebalancing the same car.
Get a quoteor call 0333 772 4864
How it is treated for tax
Bought on hire purchase, business plant and machinery normally qualifies for capital allowances on the full cost even though you pay for it monthly, which is a large part of why hire purchase is the common structure. On a finance lease you generally set the rentals against profit instead. The rules change between budgets and your position depends on how you trade, so treat this as the direction of travel and get your accountant to confirm the detail before you commit.
Wheel balancer finance questions
Can I finance a balancer on its own?
Only if it is a high-end diagnostic machine carrying enough value. A standard balancer usually sits below the minimum agreement size a funder will open. Pair it with a tyre changer or the rest of the bay equipment and the deal works without difficulty.
Are cones and adaptors included?
Typically only what the supplier bundles into the machine price. Cones, flange plates and clamping kits are tooling with limited resale value, and replacement sets bought later would not be funded. Wheel weights are a consumable and never form part of an agreement.
Does a balancer need a landlord waiver like a lift does?
No. It stands on the floor and plugs in, so it never becomes part of the building and the fixtures question does not arise. That makes balancers one of the most straightforward pieces of garage equipment to fund if you rent your premises.
Is road force measurement worth funding?
Commercially that is your call, but funders view the higher value machines favourably because they are in demand second-hand. The practical argument is that diagnosing a wheel and tyre match properly saves repeat visits, which is the cost most garages underestimate.
Can I add it to an agreement I already have?
Usually it is cleaner to write a new one, though some funders will add an asset to an existing facility. If you are already part way through an agreement with a lender, tell us who it is, because keeping everything in one place can simplify the paperwork.
Get a quoteor call 0333 772 4864
Also in general machinery finance
- Digital printing press finance
- Litho press finance
- UV flatbed printer finance
- Roll to roll printer finance
- Vinyl cutter finance
- Laminator finance
- Die cutter finance
- Paper guillotine finance
- Screen printing machine finance
- Heat press finance
- DTF printer finance
- Embroidery machine finance
- Industrial sewing machine finance
- Injection moulding machine finance
- Blow moulding machine finance
- Rotational moulding machine finance
- Extrusion line finance
- Granulator finance
- Bridge saw finance
- CNC stone router finance
- Stone edge polisher finance
- Waterjet cutting machine finance
- Glass cutting table finance
- Double glazing line finance
- Glass toughening furnace finance
- Two post lift finance
- Four post lift finance
- Tyre changer finance
- MOT bay equipment finance
- ADAS calibration equipment finance
- Vehicle spray booth finance
See everything we fund in general machinery finance →
Not an offer of finance. All finance is subject to status, affordability and lender approval.
Get your quote
Tell us what you’re looking to fund and Conor will come back to you personally — usually the same day.
Prefer to talk? Call 0333 772 4864 · serving Leeds, York, Harrogate, Wakefield, Selby, Tadcaster & across North & West Yorkshire.