Forklift and warehouse equipment finance

Industrial door finance

Sectional and high-speed doors cut heat loss, speed up traffic flow and keep the weather out of a busy despatch bay.

Whole-of-market — 60+ lenders searched, including

BarclaysAldermoreParagonAllica BankPraetura Asset FinanceSimply Asset FinanceOxburyBraemar FinanceBibby Financial ServicesBPCE Equipment SolutionsCatfoss FinanceDavenham Asset FinanceFleximizeiwocaKingsway Asset FinanceLombardMetro BankBNP ParibasBarclaysAldermoreParagonAllica BankPraetura Asset FinanceSimply Asset FinanceOxburyBraemar FinanceBibby Financial ServicesBPCE Equipment SolutionsCatfoss FinanceDavenham Asset FinanceFleximizeiwocaKingsway Asset FinanceLombardMetro BankBNP Paribas

Can you finance an industrial door?

Yes, though be clear that industrial doors are building fabric rather than equipment. Each door is made to the size of its own opening, fixed into the structure and wired in, so a removed door fits almost nowhere else and is worth very little. Funders finance door projects routinely, but as business-backed lending, often with landlord consent on a leased unit. For a modest single-door replacement, an unsecured business loan is frequently the simpler and faster route than asset finance.

Used kit: No — used industrial doors are not realistically fundable, as each is sized to its original opening and the removal cost exceeds the salvage value.

Get a quote or call 07581 364281

What would an industrial door cost per month?

Business asset finance is quoted on a flat rate, so that is what this shows — with the equivalent APR underneath, because the two are not the same number. A quick guide only; your actual rate depends on the asset, term, deposit and lender.

Amount £25,000

Term 48 months

Indicative flat rate

Approx. monthly£—

Get my exact rate

Total repayable£—

Cost of finance£—

Equivalent APR—%

Representative example: on Hire Purchase, borrowing £25,000 over 48 months at a 6.0% flat rate (equivalent to 11.5% APR representative), you would repay around £646 a month; total amount repayable approximately £31,000, of which £6,000 is the cost of finance. This calculator is for illustration only — it is not a quote or an offer of finance, and the rate and repayments you are offered will depend on the asset, term, deposit and your circumstances. CW Asset Finance is a credit broker, not a lender, and may receive a commission from the lender that funds your agreement. All finance is subject to status, affordability and lender approval. CW Asset Finance is an Appointed Representative of Rural Finance Limited, which is authorised and regulated by the Financial Conduct Authority (FRN 630701).

How lenders treat it

The softest item covered here, and there is no point pretending otherwise. A sectional or high-speed door is manufactured to a specific opening, anchored into the building and integrated with its controls and safety edges, which means recovery value is close to nil after removal costs. Funders lend against your accounts. Where they are most comfortable is within a broader fit-out, sitting alongside forklifts, racking and bay equipment as part of one project with a mix of asset quality. On a leased building expect the landlord question, since you are altering the structure. High-speed door motors and control panels have some value, but not enough to change how the deal is assessed.

Makes and models we fund

Examples of the machines we are asked to fund. This is not an exhaustive list — if what you are buying is not here, it does not mean we cannot fund it. Your supplier quote is what the agreement is written against.

Machine	What it is
Hormann SPU F42	Insulated sectional overhead door
Hormann Roller Shutter	Steel industrial roller shutter door
Hormann V 6030 SEL	High speed roll up door
Albany RR300	High speed roll door for internal openings
Efaflex SST	High speed spiral industrial door
Efaflex STR	High speed door for cold stores
Novoferm Sectional Door	Insulated sectional loading bay door
Rite-Hite FasTrax	High speed fabric roll door
Assa Abloy RR300	High speed interior rapid door
Bolton Gate Roller Shutter	British made industrial roller shutter

Get a quote or call 07581 364281

Who buys one

Operators replacing tired roller shutters that keep failing, cold and chilled sites installing high-speed doors between temperature zones, and businesses fitting out a unit where the existing doors are too slow or too small for current vehicle movements. The trigger is often an energy bill, a breakdown that trapped a lorry in a bay, or an insurance requirement on security after a break-in.

Get a quote or call 07581 364281

How it is treated for tax

Bought on hire purchase, business plant and machinery normally qualifies for capital allowances on the full cost even though you pay for it monthly, which is a large part of why hire purchase is the common structure. On a finance lease you generally set the rentals against profit instead. The rules change between budgets and your position depends on how you trade, so treat this as the direction of travel and get your accountant to confirm the detail before you commit.

Industrial door finance questions

Should we use asset finance or an unsecured loan for doors?

For a small project an unsecured business loan is often quicker, because a funder is assessing your business either way and an unsecured facility skips the asset paperwork and any landlord waiver. Asset finance becomes more attractive when the doors are part of a larger equipment project being funded together.

Can doors be included in a wider warehouse fit-out facility?

Yes, and that is usually the best route to take. A fit-out containing trucks, racking, loading bay equipment and doors gives the funder a blended package in which the hard assets carry the soft ones, which almost always prices better. Presented on their own, doors are effectively an unsecured proposition with extra administration attached to it.

Does our landlord need to agree?

Almost certainly, since replacing a door alters the building. Check your lease before ordering. Many landlords are content because a new door improves their asset, but consent takes time and a funder may want evidence of it before releasing funds, so it is not a step to leave until the end.

Are high speed doors treated better than roller shutters?

Not materially. They cost more and contain more technology, which makes the project large enough to fund comfortably, but the door is still made to fit one opening. The energy and traffic-flow savings are the real argument for them, rather than anything to do with how a funder views the asset.

Can the service contract be financed with the door?

No. Ongoing servicing and safety inspections are a revenue cost paid to the installer, not an asset. They are worth having, since powered doors are legally required to be maintained, but they sit outside the finance agreement and are invoiced separately over the door’s life.

Get a quote or call 07581 364281

Also in forklift and warehouse equipment finance

See everything we fund in forklift and warehouse equipment finance →

Not an offer of finance. All finance is subject to status, affordability and lender approval.

Get your quote

Tell us what you’re looking to fund and Conor will come back to you personally — usually the same day.

Prefer to talk? Call 07581 364281 · serving Leeds, York, Harrogate, Wakefield, Selby, Tadcaster & across North & West Yorkshire.